Part 1: What Causes the 0xc000014c Error?
Several problems can cause the “error code: 0xc000014c” on your computer. They can be as follows:
- Corrupted System Files: Malware, damaged and corrupted system files can cause Error code 0xc000014c.
- Inconsistency of System Files: When the computer turns off suddenly amidst of writing important data to the boot sector, the error code 0xc000014c might occur.
- Corrupted or Missing BCD: This error can occur due to power outages, disk write errors, boot sector viruses, and if an error occurs while manually configuring the BCD. Missing or corrupted BCD is the most common cause for this error to occur.
- Newly Installed Hardware: Any newly installed hardware can cause this error if that is not compatible with the computer.
- Bad Sectors: Bad sectors on the hard drive can occur if your PC was improperly turned off. This can cause this error to occur.
If you are aware of the reason behind the error, it will be easier for you to solve the problem. With these solutions, you can fix error code 0xc000014c Windows 10 no disc.
Solution 1: Remove the Recently Installed Hardware
If a newly installed hardware is not compatible with the system, this error might occur. In this case, you have to remove the incompatible hardware. After you have removed it, restart your computer.
Solution 2: Boot to Last Known Good Configuration
If you install or uninstall an application, that might affect the system configuration. In this case, try the last known good configuration to fix the error code 0xc000014c and other errors. To perform this, follow the given steps.
Step 1: At first, you may double-boot your PC to open the “Windows Recovery Environment” page.
Step 2: In the “Choose an Option” menu, you may click on the “Troubleshoot” option.
Step 3: Then, you may click on the “Advanced Options.”
Step 4: Now, you may click on “System Restore.”
Step 5: And then click on “Next” and there will be a list of options. You can now choose the last known good configuration.
Step 6: Lastly, click on “Close” and confirm it with “Next”. Complete the process by clicking on “Finish”.
Thus, you can troubleshoot the problem you are facing. Safe Mode, in Windows 10, works as the alternative of the “Last Known Good Configuration.”
Solution 3: Rebuild Bootable Configuration Data
Power outages and improper power off of the PC can damage the Bootable Configuration Data (BCD). To rebuild the BCD to fix this error, create Windows Media Installation first. Once the installation is done, you can rebuild BCD with the following steps.
Step 1: Now, you may click on the “Repair your computer” option, and then, go to the “Advanced Options” tab from “Troubleshoot.”
Step 2: Open the “Command Prompt” tab.
Step 3: Enter the commands and press “Enter” after each word:
- bootrec /fixmbr
- bootrec /fixboot
- bootrec /scanos
- bootrec /rebuildbcd
Step 4: Exit and restart your computer. This will solve the error code 0xc000014c in Windows 10 problem.
Solution 4: Check the disk for possible corruption
To check the disk for any corruption, follow the given steps.
Step 1: You may connect the Windows Installation Media drive to the computer and boot it from the bootable media. Click on “Repair Your Computer.”
Step 2: You may choose “Troubleshoot,” and then, “Advanced Options” and “Command Prompt.”
Step 3: Write “chkdsk C: /f /x /r” and press the “Enter” button.
After the completion of the task, restart the computer. This will check for possible corruption and repair it.
Solution 5: Use System File Checker (SFC) Tool to Fix the Error 0xc000014c
You may use System File Checker if the error code 0xc000014c has occurred due to corrupted files.
Step 1: After you boot the Windows Installation Media drive to the computer, you may click on “Repair Your Computer.”
Step 2: Choose “Advanced Options” from “Troubleshoot” and select Command prompt from there.
Step 3: Write “sfc /scannow” and press the “Enter” button. You have to wait until the process is finished.
Step 4: Restart your computer and make sure the error code 0xc000014c is solved.
Solution 6: Restore the Default and Uncorrupt Registry Values
This process involves taking out your hard drive (the drive which is unable to boot) and installing it repeatedly.
Step 1: Take the problematic hard drive out.
Step 2: You need another computer with a properly running hard drive. Connect the problematic hard drive with this second computer.
Step 3: You may boot the second computer with its good hard drive (second hard drive). So the first hard drive will operate as a secondary storage unit.
Step 4: Go to “C:\Windows\System32\config\RegBack” in the second hard drive and copy all files. Paste them in the same location in the first hard drive.
Step 5: Once it is done, shut down this computer and disconnect the first hard drive. Then, connect this hard drive with the targeted computer.
Step 6: Start the targeted computer and make sure the problem is solved.